Tag Archives: hot selling air compressor

China factory Lubricated 1year CHINAMFG 3330X1750X1640mm China Portable Air High Pressure Rotary Diesel Compressor Manufacture with Hot selling

Product Description

Model			MDS185-FF
Compressor	Air delivery	m3/min	5.18
		cu.ft/min	185
	Discharge pressure	bar	7
		psig	101.5
	Lubricating Oil Capacity	L	23
Diesel Engine	Manufacture&Model		Foxair-4571DF-005
	Cylinder Number		4
	Rotation speed(Rmp)	Operating	2650
		Idle speed(r/min)	2200
	Rated power(KW)		42
	Lubricating Oil capacity(L)		300
	Displacement (L)		2.7
	Lubricating Oil Capacity (L)		7
	Coolant Capacity (L)		9
	Battery		6-QW-70

Standard Configuration

. Suction valve Lubricating oil filter     Oil thermostatic valve   50°C radiator
Solenoid valve    Vertical air/oil tank Pressure regular valve              Air/oil separator
  Lubricating oil radiator      Safety valve   Emergency stop button                         Air filter of engine
Minimum pressure valve Lockable battery isolator switch
Air filter of compressor      Vent valve       Powder coated canopy         Shuttle valve
24V sealed for life maintenance free battery                            Fuel tank for 8 hours running

General Features

Structure diagram

1. Lifting bail 2.Exhaust outlet 3.Door 4. Handle 5.Service valve 6. Instrument panel

Feature&Benefit
Feature					Benefit
Pressure selection and control					Easy pressure setting
Flow selection and control					The working pressure and airflow rate can be adjusted according to the size of air consumption without wasting any diesel
The twin-screw rotor is directly connected with the diesel engine by a highly flexible coupling					Outputting more air with less energy consumption, featuring high reliability, longer service life, and low maintenance cost.
The two-stage air filtration system					The total efficiency of air filtration reaches 99.8% ensuring the compressor to not be infringed by dust and dirt particles and longer service life of the engine
High-temperature resistance design					Able to run for a long time under extreme cold or hot temperature from -20ºC to 50ºC
One-button start, clear operational parameters					Operators don’t have to go through long-term professional training, and unattended operations can be achieved.

Application areas

Field	Application	Nominal Working Pressure(bar)	Free Air Delivery Range(m3/min)
General Construction (building sites, road maintenance, bridges, tunnels, concrete pumping and shotcreting)	Hand-held pneumatic breakers	7~14	5~13
	Jack hammers
	Air guns
	Shotcrete equipment
	Pneumatic wrenches
	Nut runners
Ground Engineering Drilling (basement and foundation excavation for apartment blocks and other buildings)	Pneumatic rock drills	7~17	12~28
	Block cutters
	Dewatering pumps.
	Hand-held pneumatic breakers
Utility, CHINAMFG Blasting (shipyards, steel construction and large renovation jobs)	Sandblasting (remove rust, scale, paint)	7~10	10~22
Blast Hole Drilling (aggregate production for construction stabilization, cement production in limestone quarries and open pit mining)	Rock drills	14~21	12~29
	Dewatering pumps
	Hand-held breakers
High Pressure Drilling (drilling for water wells and foundations for high-rise buildings, along with geotechnical/geothermal applications)	Water well drilling	20~35	18~40
	DTH drilling
	Rotary drilling

Selection table

Small Series
Small Series	FAD		Pressure		Engine model	Dimensional Date(mm)
Small Series	m3/min	cfm	Bar	psig		length		width	height	weight(kg)
model	m3/min	cfm	Bar	psig		with tow bar	without tow bar	width	height	weight(kg)
MDS55S-7	1,55	55	7	101,5	D902	2925	1650	1200	1200	600
MDS80S-7	2,24	80	7	101,5	D1005	2925	1650	1200	1200	630
MDS100S-7	2,8	100	7	101,5	V1505	2925	1650	1200	1200	640
MDS125S-7	3,5	125	7	101,5	V1505	3065	1800	1500	1350	810
MDS130S-8	3,7	132	8	116	JE493	3065	1800	1500	1350	810
MDS185S-7	5,18	185	7	101,5	JE493	3200	1900	1740	1660	950
MDS185S-10	5,18	185	10	145	JE493	3050	1900	1740	1660	950

Middle Series (Low&Medium pressure)
Middle Series (Low&Medium pressure)	FAD		Pressure		Engine model	Dimensional Date(mm)
Middle Series (Low&Medium pressure)	m3/min	cfm	Bar	psig		length		width	height	weight(kg)
model	m3/min	cfm	Bar	psig		with tow bar	without tow bar	width	height	weight(kg)
MDS265S-7	7,42	265	7	101,5	JE493	3629	2200	1700	1470	1200
MDS300S-14	8,4	300	14	203	4BTA3.9	3850	2600	1810	2378	1800
MDS350S-10	9,9	354	10	145	4BT3.9	3850	2600	1810	2378	1800
MDS390S-7	11	393	7	101,5	4BTA3.9	3850	2600	1810	2378	1800
MDS390S-13	11	393	13	188,5	QSB4.5	3850	3100	1810	2378	1980
MDS429S-7	12	429	7	101,5	4BTA3.9	3850	2600	1810	2378	1800
MDS429S-14	12	429	14	203	QSB4.5	3850	3100	1810	2378	1980
MDS500S-14	14,1	504	14	203	6BTAA5.9	4550	3600	1810	2378	3100
MDS690S-14	19,3	689	14	203	QSB6.7	4950	3300	2170	2620	3500
MDS720S-10	20,2	721	10	145	QSB6.7	4950	3300	2170	2620	3500
MDS750S-12	21	750	12	174	QSB6.7	4950	3300	2170	2620	3500
MDS786S-10.3	22	786	10,3	149,35	QSB6.7	4950	3300	2170	2620	3500
MDS820S-14	23	821	14	203	6LTAA8.9	5300	4200	2170	2630	5200
MDS850S-8.6	24	857	8,6	124,7	6CTAA8.3	5300	4200	2170	2630	4600
MDS900S-7.1	25,3	904	7,1	102,95	6CTA8.3	5300	4200	2170	2630	4600

Middle Series (Medium&High pressure)
Middle Series (Medium&High pressure)	FAD		Pressure		Engine model	Dimensional Date(mm)
Middle Series (Medium&High pressure)	m3/min	cfm	Bar	psig		length		width	height	weight(kg)
model	m3/min	cfm	Bar	psig		with tow bar	without tow bar	width	height	weight(kg)
MDS460S-17	13	464	17	246,5	6BTAA5.9	4600	3500	1800	2230	3500
MDS620S-17	17,4	621	17	246,5	6LTAA8.9	5300	4200	2170	2630	5200
MDS650S-19	18,2	650	19	275,5	QSL8.9	5300	4200	2170	2630	5200
MDS690S-20.4	19,4	693	20,4	295,8	6LTAA8.9	5300	4200	2170	2630	5200
MDS770S-21	21,6	771	21	304,5	6LTAA8.9	5300	4200	2100	2630	5280
MDS830S-18	23,2	830	18	261	6LTAA8.9	5300	4200	2100	2630	5280
MDS820S-25	23	821	25	362,5	QSM11	5300	4200	2100	2630	5600
MDS860S-20.4/17.3	24,2	864	20,4	295,8	QSL8.9	5300	4200	2100	2630	5280
MDS860S-20.4/17.3	24,2	864	17,3	250,85	QSL8.9	5300	4200	2100	2630	5280
MDS875S-23	24,5	875	23	333,5	QSM11	5300	4200	2100	2630	5600

Large Series (Low&Medium pressure)
Large Series (Low&Medium pressure)	FAD		Pressure		Engine model	Dimensional Date(mm)
Large Series (Low&Medium pressure)	m3/min	cfm	Bar	psig		length		width	height	weight(kg)
model	m3/min	cfm	Bar	psig		with tow bar	without tow bar	width	height	weight(kg)
MDS900S-14.2/10.5	25,1	896	14,2	205,9	6LTAA8.9	5300	4200	2100	2630	5280
MDS900S-14.2/10.5	25,2	900	10,5	152,25	6LTAA8.9	5300	4200	2100	2630	5280
MDS910S-14	25,6	914	14	203	6LTAA8.9	5300	4200	2100	2630	5280
MDS970S-10	27,2	971	10	145	QSL8.9	5300	4200	2100	2630	5280
MDS1011S-8.6	28,3	1011	8,6	124,7	QSL8.9	5300	4200	2100	2630	5280
MDS1054S-12	29,5	1054	12	174	QSL8.9	5300	4200	2100	2630	5280
MDS1250S-8.6	35	1250	8,6	124,7	QSL8.9	5300	4200	2100	2630	5280
MDS1400S-13	40	1400	13	188,5	QSZ13	6200	4700	2100	2630	5800
MDS1600S-10.3	45	1600	10,3	149,35	QSZ13	6200	4700	2100	2630	5800
MDS1785S-13	50	1785	13	188,5	QSZ13	6200	4700	2100	2630	5800
MDS2140S-10	60	2142	10	145	QSZ14	7400	5400	2230	2630	8400

Large Series (Medium&High pressure)
Large Series (Medium&High pressure)	FAD		Pressure		Engine model	Dimensional Date(mm)
Large Series (Medium&High pressure)	m3/min	cfm	Bar	psig		length		width	height	weight(kg)
model	m3/min	cfm	Bar	psig		with tow bar	without tow bar	width	height	weight(kg)
MDS900S-20	25,3	904	20	290	QSM11	5300	4200	2100	2630	5800
MDS960S-18	26,9	961	18	261	QSM11	5300	4200	2100	2630	5800
MDS1000S-35	28,2	1000	35	507,5	QSZ13	6200	4700	2100	2630	7200
MDS1089S-25	30,5	1089	25	362,5	QSZ13	6200	4700	2100	2630	7200
MDS1200S-24	33,6	1200	24	348	QSZ13	6200	4700	2100	2630	7200
MDS1250S-21	35	1250	21	304,5	QSZ13	6200	4700	2100	2630	7200
MDS1250S-25	35	1250	25	362,5	QSZ13	6200	4700	2100	2630	7200
MDS1250S-30	35	1250	30	435	WP17G770E302	6200	4700	2100	2630	7800
MDS1250S-35	35	1250	35	507,5	WP17G770E302	6200	4700	2100	2630	7800
MDS1250S-40	35	1250	40	580	WP17G770E302	6200	4700	2100	2630	7800
MDS1428S-18	40	1428	18	261	QSZ13	6200	4700	2100	2630	7200
MDS1428S-35	40	1428	35	507,5	TAD1643VE-B	7400	5500	2180	2650	10000
MDS1428S-40	40	1428	40	580	QSK19	7400	5500	2180	2650	10000
MDS1600S-25	44,8	1600	25	362,5	WP17G770E302	7400	5500	2180	2650	10000

GTL Air compressor test system

After-sales Service:	Online
Warranty:	1year
Lubrication Style:	Lubricated
Cooling System:	Water Cooling
Power Source:	Diesel Engine
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China factory Lubricated 1year CHINAMFG 3330X1750X1640mm China Portable Air High Pressure Rotary Diesel Compressor Manufacture with Hot selling
editor by CX 2023-11-01

China wholesaler Variable Speed Driven Rotary/Screw Air Compressor (SCR250V Series) with Hot selling

Product Description

Product Technical Description

Model :	VSD Series (DV Series)
Type:	VSD Screw Air Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	7~12.5bar
Installed Motor Power:	22~280 Kw
Capacity:	3.5~52.5 m3/min
Color:	Blue
Driven Method:	Direct Driven
Air End:	Direct driven airend , high reliability
Trademark:	SCR
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO, UL, ASME, GHOST
Origin:	ZheJiang , China
application:	Casting , Metal , Plastic , Rubber

Product Features

1.Large rotors and low speed running result in a low noise, low vibration airend that produces exceptional flow rates.

2.The rotor is manufactured in a class leading wear-resistant high strength alloy steel

3.Variable speed main motor

The unique motor design offers a maximum torque throughout the wide speed range.

The motor is designed to reduce heat build up in the rotor, thus avoiding any damage to the motor insulation.

A separate force ventilated cooling fan ensures correct motor cooling even at prolonged periods of low speed running.

4.Bigger current vector inverter

Oversized vector controlled Variable speed drive guarantees maximum current output

5.Vector control technology minimises motor temperature and offers sufficient torque for low speed operation.

6.German KTR coupling

7.High quality air filter system

Model		SCR250V-8	SCR250V-10
Capacity/Pressure(m3/min,/BAR)		31.6/8	28.3/10
TEFC Motor	Power(KW)	185KW(250H.P)
	Speed(r/min)	2975
	Starting way	Inverter Type
	Volt(V)	380/400/415(220)
	Motor safety grade	IP54
	Motor isolation grade	F
Electrical Supply		380(400,415)V/50Hz/3Phase, 220V/60HZ/3P
Outlet Temperature(ºC)		≤ Environment Temperature+10ºC
Driven way		Direct Driven
Noise level at 1 meter		78±3dB
Cooling method		Air cooling
Oil content		≤3 ppm
Outlet Connection		DN80
Dimension	Length(mm)	2700
	Width(mm)	1820
	Height(mm)	1850
Weight(KG)		2800

Advantages

Application

About SCR

1 What trade terms do we provide? What kind of settlement currency do we offer?

Trade term :CIF ,CFR ,FOB,Ex-Works
As far Our business traded in Dollars ,Euros and RMB .

2 How long is our delivery?

Our standard delivery time is 30-40 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.

3 What is the voltage of the compressor?

The available voltage include 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the same time we provide other voltage according to customer requirement.

4 Can our compressor run in high temperature environment? What is the working temperature range for our machine?

Yes ,our machine would run in high temperature environment ,until now our products have been sold to many countries which would meet high temperature in summer ,such like Iraq, Saudi Arabia, Egypt, Algeria, etc.
Work temperature range :1-45 ºC(33.8ºF-113ºF)

5 What’s the min. Order requirement ?

Min. Order requirement is 1PCS.

Performance:	Low Noise
Drive Mode:	Electric
Configuration:	Stationary
Application:	Air Power
High Quality:	Good Performance
Save Energy:	Environment-Friendly

Customization:	Available \|

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

China wholesaler Variable Speed Driven Rotary/Screw Air Compressor (SCR250V Series) with Hot selling
editor by CX 2023-11-01

China Hot selling High Quality Air Compressor for Hospital portable air compressor

Product Description

High Quality Air Compressor for Hospital
High Quality Air Compressor for Hospital

Product Description

1. Description

The compressed air is generated by the air compressor, enters the gas storage tank through the aftercooler, and then removes impurities, oil mist and moisture in the compressed air through the filter group and the adsorption dryer, and then is regulated by the pressure reducer. Compressed air ducts are used in medical equipment such as operating rooms and ICUs.

The central compressed air station is composed of an air compressor, an aftercooler, a gas storage tank, a filter group, an adsorption dryer, an automatic control cabinet, and an alarm. Usually it is a two-unit configuration, 1 for each.

2. Why use dry, clean compressed air?

IInhibit the survival and reproduction of bacteria
Prevent condensation into liquid water at low temperatures
Liquid water will damage these equipment after entering the anesthesia machine or ventilator
Prevent icing blocked pipes below zero
High humidity in the pipe can cause oxidation of the pipe

3. Advantage
1.Oil-free design, ensuring the generation of qualified medical air
2.Reduced equipment failure frequency, saving costs
3.Controlled moisture content, achieving high safety performance

4. CHINAMFG Hospital Compressed Air Generator Working Principle

4.1 Medical Compressed Air Station System Specifications

System Model	Air Compressor		Purification controller		Air tanks (M3)	Output Consumption (M3/min)	Output Pressure (Mpa)
System Model	Model	Number	Model	Number	Air tanks (M3)	Output Consumption (M3/min)	Output Pressure (Mpa)
ETA-04	ET-YA041	1	ET-YK15	1	0.3	0.41	0.4-0.6
ETA-07	ET-YA042	1	ET-YK15	1	0.3	0.82	0.4-0.6
ETA-11	ET-YA043	1	ET-YK26	1	0.6	1.23	0.4-0.6
ETA-15	ET-YA042	2	ET-YK26	1	0.6	1.64	0.4-0.6
ETA-22	ET-YA043	2	ET-YK38	1	1	2.46	0.4-0.6
ETA-30	ET-YA043	3	ET-YK38	1	1	3.69	0.4-0.6

4.2 Air Compressor Specifications

Model	Output Consumption (M3/min)	Working pressure (Mpa)	Power	Power (KW)	LWH(mm)	Weight(KG)	Noise(dB)
ET-YA041	0.41	0.6-0.8	AC380V/50Hz/3P	4	1300×700×750	170	65±3
ET-YA042	0.82	0.6-0.8	AC380V/50Hz/3P	8	1300×700×1350	255	65±3
ET-YA043	1.23	0.6-0.8	AC380V/50Hz/3P	12	1300×700×1950	345	65±3

4.3 Purification Controller Specifications

Model	Capacity (M3/min)	Working pressure (Mpa)	Power	Power (KW)	Dew Point (ºC)	Weight (KG)	LWH(mm)	Noise(dB)
ET-YK15	1.5	0.6-0.8	AC220V/50Hz	30	</=-40	356	1300×900×1700	</=75
ET-YK26	2.6	0.6-0.8	AC220V/51Hz	30	</=-40	374	1300×900×1700	</=75
ET-YK38	3.8	0.6-0.8	AC220V/52Hz	30	</=-40	412	1300×900×1700	</=75

5. Quality Control Process
ETR Enigineering & Technology,clients can be sure of the quality of CHINAMFG solution. ETR uses only the best suppliers and components. And all compress air system are tested & commissioned by professional Experts to make sure everything is qualified before they leave the factory.

Accessories

Air compressor
Air compressor from Atlas Copco, an international famous brand, best manufacturer of air compressor in the world, is adopt in all CHINAMFG PSA oxygen generator to provide best in-time after-sales service to customers all around the world with low maintenance and minimum repair rate.

Refrigerate Air dryer
Refrigerate Air dryer with best, reliable performance from SMC, Japan, a international famous brand, one of the best manufacturer of refrigerate air dryer in the world, is adopt in all ETR PSA Oxygen Generator to achieve best pre-treatment for the compressed air.

Desiccant air dryer
Desiccant air dryer made by CHINAMFG Rand, with high efficiency and reliable performance is adopt if the user has strict requirement on dew-point of produced oxygen gas.

Air filters
Treatment for compressed air is very important to the PSA oxygen generator. Online compressed air filters made by CHINAMFG are adopt to remove oil, dust, water in the compressed air.

Product oxygen filter
Bacteria removal filters made by apureda will be adopt for product gas treatment to meet customer’s requirements.

Instruments
Oxygen analyzer, pressure transmitter, oxygen flowmeter are standard accessories for CHINAMFG oxygen generator, and all from China top supplier. Dew-point analyzer, glass flowmeter, CO analyzer, etc. are optional.
Gas Monitoring System
This system can be monitored by both on-site electric control cabinet and mobile phone APP.

FAQ

1. Are you manufacturer or Trade Company?
We are the manufacturer of compress air system, founded in 2003.

2. What’s the order compress air system process?
a. Inquiry—provide us all clear requirements.
b. Quotation—official quotation form with all clear specifications.
c. Printing file— PDF, Ai, CDR, PSD, the picture resolution must be at least 300 dpi.
d. Contract confirmation—provide correct contract details.
e. Payment terms— Negotiable.
f. Production—mass production
g. Shipping— by sea, air or courier. Detailed picture of package will be provided.
h. Installation and commissioning

3.What terms of payment you use?
T/T, L/C etc.

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Semi-Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

Nitrogen
Oxygen
Hydrogen
Carbon dioxide
Natural gas
Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

As altitude increases, the air density decreases. This means there is less oxygen available per unit volume of air. Since air compressors rely on the intake of atmospheric air for compression, the reduced air density at higher altitudes can lead to a decrease in compressor performance.

2. Reduced Airflow:

The decrease in air density at higher altitudes results in reduced airflow. This can affect the cooling capacity of the compressor, as lower airflow hampers the dissipation of heat generated during compression. Inadequate cooling can lead to increased operating temperatures and potential overheating of the compressor.

3. Decreased Power Output:

Lower air density at higher altitudes also affects the power output of the compressor. The reduced oxygen content in the air can result in incomplete combustion, leading to decreased power generation. As a result, the compressor may deliver lower airflow and pressure than its rated capacity.

4. Extended Compression Cycle:

At higher altitudes, the air compressor needs to work harder to compress the thinner air. This can lead to an extended compression cycle, as the compressor may require more time to reach the desired pressure levels. The longer compression cycle can affect the overall efficiency and productivity of the compressor.

5. Pressure Adjustments:

When operating an air compressor at higher altitudes, it may be necessary to adjust the pressure settings. As the ambient air pressure decreases with altitude, the compressor’s pressure gauge may need to be recalibrated to maintain the desired pressure output. Failing to make these adjustments can result in underinflated tires, improper tool performance, or other issues.

6. Compressor Design:

Some air compressors are specifically designed to handle higher altitudes. These models may incorporate features such as larger intake filters, more robust cooling systems, and adjusted compression ratios to compensate for the reduced air density and maintain optimal performance.

7. Maintenance Considerations:

Operating an air compressor at higher altitudes may require additional maintenance and monitoring. It is important to regularly check and clean the intake filters to ensure proper airflow. Monitoring the compressor’s operating temperature and making any necessary adjustments or repairs is also crucial to prevent overheating and maintain efficient performance.

When using an air compressor at higher altitudes, it is advisable to consult the manufacturer’s guidelines and recommendations specific to altitude operations. Following these guidelines and considering the impact of altitude on air compressor performance will help ensure safe and efficient operation.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

China Hot selling High Quality Air Compressor for Hospital portable air compressor
editor by CX 2023-10-30

China best High Quality 22kw 30HP Sale Promotion Screw Air Compressor with Hot selling

Product Description

Product Description
headline:High quality 22KW 30HP sale promotion screw air compressor

Model

AS-30HB

Power(KW)

Free air deliver /Discharge pressure (m3/min/Mpa)

3.9/0.7

3.7/0.8

3.3/1.0

2.8/1.2

Compressor Stage

Single Stage

Ambient Temperature(ºC)

-5ºC±45ºC

Cooling Method

Air Cooling/Water Cooling

Exhaust Temperature(ºC)

≤Ambient Temperature 29571503 29571 0571 0 29571212 29571072 2906

Packaging&Shipping
packing: Neutral packing & our packing
shipping: 1-3 working days

Certification

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

1. Power Source:

2. Environmental Conditions:

3. Accessibility and Transport:

4. Maintenance and Service:

5. Fuel and Lubricants:

6. Noise and Environmental Impact:

7. Communication and Remote Monitoring:

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

Compression Process:

Pressure Output:

Efficiency:

Intercooling:

Applications:

air compressor

In which industries are air compressors widely used?

Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:

1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.

2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.

3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.

4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.

5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.

6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.

7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.

8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.

9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.

These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.

China best High Quality 22kw 30HP Sale Promotion Screw Air Compressor with Hot selling
editor by CX 2023-10-27

China Best Sales 17-25 Bar Air Compressor for Borehole Drilling Rig CHINAMFG Aircompressor Kszj-31/25-34/17 with Hot selling

Product Description

Features of KAISHAN air compressor:

1.Low operating sound and less vibration design.Easy serviceability.

2.Low fuel consumption to realize far distance outdoor usage;Full protection system,energy saving.

3.High efficient Airend:
Large diameter rotor, airend connect with diesel engine through coupling and no reduction gear inside, more reliability, the
rotary speed is same with the diesel engine’s, more longer lifespan.

4.Diesel Engine of Famous Brand:
Select the diesel engine of CHINAMFG or CHINAMFG brand, satisfy the emission requirement of Europe, low oil consumption, after sale service system all over China.

5.Good adaptability:
The Portable Air Compressor automatically control the air delivery of diesel engine by matching the demand of air consumption, which equals to frequency conversion control in motor power screw air compressor.

Model	Exhaust pressure	Air delivery	Engine power	Exhaust outlet	Weight	Dimension
Model	(Bar)	(m³/min)	(HP)	Exhaust outlet	(KG)	(mm)
KSZJ-15/14.5	14.5	15	Yuchai Engine	G21, G3/41	2500	280015201780
KSZJ-18/17	17	18	Yuchai 260HP	G21, G3/41	2700	305018001800
KSZJ-18/17A	17	18	Yuchai 220HP	G21, G3/41	2200	280015201780
KSZJ-29/23G	23	29	Yuchai 400HP	G21, G3/41	4050	350019502030
KSZJ-29/23-32/17	17-23	29-32	Yuchai 400HP	G21, G3/41	4050	350019502030
KSZJ-35/25-38/20	20-25	35-38	Yuchai 550HP	G21, G3/41	4500	350019502320
KSZJ-35/25-38/20K	20-25	35-38	Cummins 550HP	G21, G3/41	4500	350019502200
KSZJ-31/25-34/17	17-25	31-34	Yuchai Engine	G21, G3/41	4500	350021002200
LGZJ-31/25-35/18	18-25	31-35	Yuchai 400HP	G21, G3/41	4500	365020002200
LGZJ-36/30-41/20	20-30	36-41	Yuchai 560HP	G21, G3/41	6000	380021602300
LGZJ-36/30-41/20K	20-30	36-41	Cummins 550HP	G21, G3/41	5800	380021602330
LGZJ-30/35-35/25	25-35	30-35	Yuchai 560HP	G21, G3/41	6000	380021602300
LGZJ-30/35-35/25K	25-35	30-35	Cummins 550HP	G21, G3/41	5800	380021602330
LGCG-43/25-37/35	25-35	43-35	Yuchai 775HP	G21, G3/41	7000	416022002257

After-sales Service:	Video Technical Support, Online Support, Spare PAR
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Cylinder Position:	/

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

1. Power Source:

2. Environmental Conditions:

3. Accessibility and Transport:

4. Maintenance and Service:

5. Fuel and Lubricants:

6. Noise and Environmental Impact:

7. Communication and Remote Monitoring:

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China Best Sales 17-25 Bar Air Compressor for Borehole Drilling Rig CHINAMFG Aircompressor Kszj-31/25-34/17 with Hot selling
editor by CX 2023-10-27

China Hot selling High Pressure Laser Cutting Machine Integrated Air Compressor for Laser Cutting Metal wholesaler

Product Description

High Pressure Laser Cutting Machine Integrated Air Compressor For Laser Cutting Metal

Main Features:

1. The flexible belt will be automatically tensioned in use. Through adjusting the tension, minimize the loss of pressure and power, to enhance the efficiency of compression.

2. Using the precise spin-oil separator and special two-pole buffer separation, it can minimize the oil consumption, guarantee the outlet gas purity, and extend the lifetime of filter elements.

3. With the toothed V-belt, it has good heat dissipation, long life, higher gear drive and transmission efficiency, as high as over 98%.

Oil Filter: Good Quality filters ensure longer working life and save the maintenance time and cost.

Stainless Steel Hoses: High and low temperature resistant, high pressure resistant.

Compressed Air Vessel: Reduction of pressure drops and energy costs, quality air with low oil content.

Air End: Imported DLOL air end, advanced profile design.

Electric Motor: Premium efficiency Totally TEFC IP54/IP55 motor (Class F insulation) protects against dust and chemicals etc.

Air Filter: Two-stage dust removal and filtering system with efficiency of up to 99.9% even in heavy-duty environment.

Cooler: High quality aluminum material, alternating expression cooler fins, ensure the perfect radiating effect.

Technical parameters:

Model	20A/16
Power	20HP / 15KW
Pressure	1.6MPa / 16bar
Air Flow	1.0m3/min
Dimension	16007801600mm
Outlet size	G3/4
Weight	415KG

Our workshop:

After-sales Service:	Free Spare Parts
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

Compression Process:

Pressure Output:

Efficiency:

Intercooling:

Applications:

air compressor

Are there air compressors specifically designed for high-pressure applications?

Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

China Hot selling High Pressure Laser Cutting Machine Integrated Air Compressor for Laser Cutting Metal wholesaler
editor by CX 2023-10-27

China Hot selling CHINAMFG SA+Series Screw Air Compressor SAV+37A portable air compressor

Product Description

FUSHENG Stationary Screw Air Compressor
Model:SAV+37A

Compressed Air Station

SA04-11 Series offers compressed air total solution to provide high quality compressed air.
Efficient processed integrated engineering.
e-COOL is environmentally-friendly technology combining smart compressor layout.
Equipped with IE3 high efficient motor.
AIMS Plus Intelligent Control System
Variable speed drive is also available option for SA08-11.

Precision Build Airend

Every CHINAMFG air compressor incorporates components of the highest quality. From the smallest airend to the largest, each features the latest in rotor profile architecture, combined with multiple roller and angular bearings. Our confidence in the durability and integrity of our design to withstand the radial and thrust forces generated by the compression process, is reflected by our industry-leading airend warranty.

The SA Series’ unique design, features an encapsulated airend, integrated separator tank, inlet valve, spin-on separator, oil filter and inlet filters to optimize space-saving requirements and reduce pipe connections to minimize leakage and lubricant consumption.

e-COOL Technology

e-COOL is environmentally-friendly technology combining smart compressor layout, strategic component selection and location, and cooling airflow and operation to minimize the impact of temperature on compressor efficiency and reliability.

Maximum Reliability – Less thermal stress extends life of components.
High Efficiency – Centrifugal cooling fan maximizes heat exchange efficiency.
Lower Operating Costs – Lower internal compressor temperatures results in better volumetric and electrical efficiency.
Better Air Quality – Cooler operation means less residual oil in the compressed air.

AIMS Plus Intelligent Control System

Standard Features Include:

User-friendly interface with informative menu structure.
Remote Start/Stop.
Frost protection as low as -10˚C.
Service timers for optimized maintenance.
Automatic or manual lead/lag control.
Up to 8 units can be sequentially controlled.
RS485 communication port.
Supports multiple languages: English, German, Italian, Spanish, Portuguese and Chinese.
Emergency stop.
IP54 electrics.

About FSI
Since CHINAMFG was founded in 1953, it has transformed from a small ZheJiang ese company to a regional manufacturing enterprise, taking root in China and various Southeast Asian countries such as Malaysia, Thailand, Indonesia and Vietnam. The company was initially built from the ground up, and it overcame daunting challenges to gain a foothold in ZheJiang , where it specialized in overhauling all types of air compressors made in European countries, the United States of America, and Japan. Over the years, CHINAMFG expanded its reach to Europe and North America through mergers and acquisitions, allowing it to become 1 of the most globalized manufacturing groups in the compressor field. CHINAMFG attributes its growth and persistence to its commitment to meet the mission, “Pursuing CHINAMFG and Enriching Life”, as embraced by its founder, Mr. Hou-Teng Lee. As the company continues to grow, it aims to create products and services that are not only competitive in the international market, but also meet the requirements for better environmental protection, energy efficiency, high-quality, and customer satisfaction. With Fusheng’s leading edge and patented R&D technology, automated production equipment, global distribution channels, and integrated global resources, CHINAMFG is equipped to provide a full and complete product line.

Our company’s purpose – to help make life better by relying on us – and the set of values that define us are the foundation of our company’s culture and success. We think and act like owners, taking responsibility for our own actions and always striving to care for our neighbors and create a brighter, healthier shared planet for everyone. We are committed to the success of our customers. Our goal is to operate with clarity and straightforwardness, building lifelong, ongoing and meaningful connections with our customers.

We are driven by a spirit of action and an entrepreneurial spirit of innovation and progress; we accept and embrace the many challenges that come with such responsibility. We speak honestly, admit mistakes, and always strive for openness and clarity. We have bold ambitions while moving CHINAMFG with humility and integrity, striving to earn trust every day. We have the expertise and experience to solve the toughest problems, but no matter how difficult the challenge, we are always sincere and humble. We are committed to fostering team innovation and cultivating and celebrating a culture that embraces diverse opinions, backgrounds and experiences. Employees who are driven by our purpose and values are an unstoppable force that strengthens our ability to deliver benefits to our stakeholders and ensure the long-term health and safety of our company.

Bestrand is a leading supplier of compressed air system. Past 10 years, we established very good partnership with FUSHENG. We have provided all kinds of products from CHINAMFG include air compressor, after treatment, spare parts to customers all over the world. Pls feel free to contact us for a quote.

Lubrication Style:	Lubricated
Cooling System:	Air Cooling or Water Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

1. Power Source:

2. Environmental Conditions:

3. Accessibility and Transport:

4. Maintenance and Service:

5. Fuel and Lubricants:

6. Noise and Environmental Impact:

7. Communication and Remote Monitoring:

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

Compression Process:

Pressure Output:

Efficiency:

Intercooling:

Applications:

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China Hot selling CHINAMFG SA+Series Screw Air Compressor SAV+37A portable air compressor
editor by CX 2023-10-26

China Hot selling CHINAMFG 37kw 50HP Food Grade Oil-Free Water Lubricated Screw Air Compressor with Best Sales

Product Description

DHH 37kW 50HP food grade oil-free water lubricated screw air compressor

100% oil free water injection screw air compressor for medicine production and package use

From the production of tablets to the application of preservatives, during filling and dosing. Compressed air is usually in direct contact with the product or package. Zero-grade oil-free air prevents oil from being transferred directly to the product. For process-grade aseptic air requirements, zero-grade oil-free air is essential. CHINAMFG compressor Zero-grade 100% technology Reduced product safety issues.

Oil Free –Totally Oil Free:
Oil free water lubrication screw air compressor is a kind of compressor that provides clean, pollution-free, 100% oil free screw air compressor, its zero emission can protect the environment ekciently.
Water –Lubrication, Sealing and Cooling:
Ideal isothermal compression High efficiency (large air delivery)
Low temperature compression No need the intercooler and after cooler
Low rotation speed Low noise, low vibration and no need the overdrive gear Low viscosity of lubrication water Easy to be separated with the air
All stainless steel pipe :
Simple ,non-corrosive,non-polluting,high reliablity
Single Stage Compression ,High Efficiency ,and Energy Saving ,and Easy Maintenance: Single stage compression makes the structure easy.
Compression ekciency is higher than the 2 stage dry air compressor.
Less consumable parts, easy to be disassembled, reduce the maintenance cost and time greatly.

Water lubrication oil free screw compressor
OIL FREE SINGLE SCREW WATER LUBRICATION AIR COMPRESSOR:

Top Compression Structure in the World —- Z Air End
High-tech crystal.
Widely used in the world.
” Z air end” is composed of 1 active rotor and 2 sets high-precision passive rotors, to achieve the characteristics of dynamic equilibrium, small vibration, low noise and long service life.
Oil Free —-Totally Oil Free
ZREW oil free water lubrication screw air compressor is a kind of compressor that provides clean, pollution-free, 100% oil free screw air compressor, its zero emission can protect the environment efficiently

Water —- Lubrication, Sealing and Cooling

Ideal isothermal compression
Low temperature compression
Low rotation speed
Low viscosity of lubrication water

High efficiency (large air delivery)
No need the intercooler and after cooler
Low noise, low vibration and no need the overdrive gear
Easy to be separated with the air

Technical Parameters:

Model	Air Delivery (m3/min)			Power (kW)	Noise (Db)	Outlet diameter	Dimension (mm)			Weight (Kg)
	0.8Mpa	1.0Mpa	1.25Mpa				Length	Width	Height
DHH7.5WS	0.35-1.15	0.30-1.02	0.24-0.81	7.5	58	3/4″	800	800	1200	510
DHH11WS	0.54-1.55	0.45-1.32	0.35-1.01	11	60	3/4″	1150	755	1340	620
DHH15WS	0.75-2.30	0.65-2.12	0.60-1.60	15	63	3/4″	1150	755	1340	670
DHH18.5WS	0.90-3.10	0.90-2.62	0.60-2.10	18.5	65	1″	1400	900	1450	730
DHH22WS	1.10-3.42	0.97-3.15	0.85-2.62	22	65	1″	1400	900	1450	780
DHH30WS	1.55-5.05	1.26-4.20	1.10-3.18	30	67	1 1/4″	1550	1150	1550	1150
DHH37WS	1.91-6.10	1.60-5.25	1.42-4.85	37	67	1 1/4″	1550	1150	1550	1200
DHH45WS	2.50-7.60	1.91-6.15	1.70-5.65	45	68	2″	1980	1300	1760	1490
DHH55WS	3.00-9.60	1.91-6.15	2.30-7.45	55	70	2″	1980	1300	1760	1570
DHH75WS	3.95-13.00	3.40-11.42	3.00-9.85	75	73	2″	2100	1600	1900	2250
DHH90WS	5.00-16.25	4.30-14.55	3.72-12.30	90	73	2 1/2″	2400	1600	2000	3150
DHH110WS	6.00-19.25	5.07-16.80	4.65-15.15	110	78	2 1/2″	3000	1700	2250	3150
DHH132WS	6.75-22.52	6.00-20.30	5.07-18.25	132	78	2 1/2″	3000	1700	2250	3500
DHH160WS	8.50-28.11	7.60-24.50	6.70-22.15	160	80	DN80	2700	1800	2050	3900
DHH185WS	10.00-33.65	8.72-28.50	7.75-24.50	185	80	DN80	2700	1800	2050	4050
DHH200WS	11.20-36.63	9.68-32.75	9.20-27.50	200	80	DN100	2700	1800	2050	4200
DHH250WS	13.50-40.50	12.30-36.30	10.20-32.50	250	80	DN100	2700	1800	2050	4800

Advantages

Oil Free —-Totally Oil Free:
Oil free water lubrication screw air compressor is a kind of compressor that provides clean, pollution-free, 100% oil free screw air compressor, its zero emission can protect the environment efficiently.

Water —- Lubrication, Sealing and Cooling:
Ideal isothermal compression High efficiency (large air delivery)
Low temperature compression No need the intercooler and after cooler
Low rotation speed Low noise, low vibration and no need the overdrive gear
Low viscosity of lubrication water Easy to be separated with the air

All stainless steel pipe : Simple ,non-corrosive,non-polluting,high reliablity

Single Stage Compression ,High Efficiency ,and Energy Saving ,and Easy Maintenance: Single stage compression makes the structure easy.Compression efficiency is higher than the 2 stage dry air compressor.Less consumable parts, easy to be disassembled, reduce the maintenance cost and time greatly.

Customer feedback

Company Profile

Company Profile

Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineers’ teams.We focus on the research & develop, manufacture and energy-saving solutions of screw air compressor to create value for customers and society.

Dehaha opened to the world since 2015, and now we have a foreign trade department with more than dozens people, serving customers around the world 24 hours. We have sales representatives who can speak English, Spanish, Portuguese, French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.now our valued customers are over 130 countries. Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.

Dehaha continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly to reach the business principle “Energy Saving First, Mutual Value Shared”. The production line of CHINAMFG is consist of screw air compressor from 5.5KW to 550KW, oil free air compressor, portable air compressor, permanent magnet variable frequency air compressor, high pressure air compressor and compressed air purification equipment, etc.

Dehaha mission is to be a world-renowned high-end brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff. Committed to offer our customers a silent and energy-saving manufactured products.

FAQ

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of ZheJiang , China, more than 24 years.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
2. Some key parts are imported from overseas
3.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

After-sales Service:	Online Support
Warranty:	24 Months
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

Are there air compressors specifically designed for high-pressure applications?

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

China Hot selling CHINAMFG 37kw 50HP Food Grade Oil-Free Water Lubricated Screw Air Compressor with Best Sales
editor by CX 2023-10-25

China Hot selling 2018 Air Compressor Free Oil Silent Mini Screw Air Compressor arb air compressor

Product Description

PRODUCTS DESCRIPTION

>High efficiency and energy saving double stage air end

First stage compression unit and the second stage compression unit are integrated in 1 air end driven directly by the helical gear, the optimal linear speed for each stage.

After the first stage compression,constant pressure compression by intensify spread oil cooling, reduces the second stage compression suction temperature,ensure that the second stage compression unit is close to is other compression.

compression ratio reasonable distribution, optimized bearing design, second stage compression reduces the compression ratio of each stage, reduces internal leakage, improves the volume efficiency, reduces the bearing load, and improves the life of the air end.

In the same power, double stage compression energy saving is 15% more than the CHINAMFG compression.

>The latest generation of efficient XA series rotor type line

Latest generation of XA series bilateral asymmetric optimization of rotor type line, male and female rotor 6/5 tooth number ratio.

“XA” series rotor type line,using CHINAMFG Cylinder and Angle contact ball high efficient bearings, bearing lifetime more than 100000 hours.

Big rotor, low speed, high precision, high efficiency, low noise, low vibration, high reliability,long lifetime design, adhering to the “high efficiency, energy saving, reliable, durable “manufacturing philosophy

PRODUCTS SHOW
2018 air compressor free oil silent mini screw air compressor

CONTACT US

Contact person: Mr.Hongming Zhao
Address: Xihu (West Lake) Dis.wu Town, Xihu (West Lake) Dis. District, HangZhou, ZHangZhoug, China
Telephone: 86 – 574 – 88336262 Fax: 86 – 574 – 88336161
Website: http://nb-xinda /
Don’t hesitate to contact us if you have any questions.

Cooling System:	Air Cooling
Structure Type:	Twin-Screw Compressor
Type:	Twin-Screw Compressor
Feature:	High Efficiency
Item:	Double Stage Compressor
Transport Package:	Non-Wooden

Customization:	Available \|

air compressor

How are air compressors used in the food and beverage industry?

Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:

1. Packaging and Filling:

Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.

2. Cleaning and Sanitization:

Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.

3. Cooling and Refrigeration:

In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.

4. Aeration and Mixing:

Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.

5. Pneumatic Conveying:

In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.

6. Quality Control and Testing:

Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.

7. Air Agitation:

In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.

It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

Can air compressors be used for medical and dental applications?

1. Dental Tools:

2. Medical Devices:

3. Laboratory Applications:

4. Surgical Tools:

5. Sterilization and Autoclaves:

6. Dental Air Compressors:

7. Air Quality Standards:

8. Compliance and Regulations:

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China Hot selling 2018 Air Compressor Free Oil Silent Mini Screw Air Compressor arb air compressor
editor by CX 2023-10-24

China Best Sales CHINAMFG 125HP 380V 415V 220V 50Hz 60Hz 16.3m3/Min Direct Drive Screw Air Compressor with Hot selling

Product Description

1.Technical Specifications:
1)Input:110V/208V/220V/230V/240V/380V/415V and cutomer require,50 to 60Hz(worldwide use)
2)Output:AC Power
3)power: 4kw-315kw
4)Outlet: 0.55-57m3/min
5)accep:OEM
6)MOQ:1pcs

2.Protections
1)over voltage protection:100%
2)over current protection:100%
3)over load protection,auto-recovery
4)Short-circuit protection:automatic recovery

3.Environmental requirement
1)operating temperature:-5ºC-50ºC
2)storage temperature:-5ºC-45ºC
3)operating relative humidity:595%RH

4.Advantage to cooperate with us
1)Over 5years of professional experience in design and Service.6000 Square Factory!
2)Passed CE,ISO9001,ASME certificated.Reliable quality,Defect rate is only 0.03%.
3)Warranty:3 year for compressor(except air filter,oil filter,oil separator),2 year for airend.
4)Accept OEM,proprietary brand services.
5)100% Aging test before delivery!
6)Brand new replacement product,work as repacement parts,100% OEM Compatible!

5.Pictures for your reference
We are real and reliable original manufacturer factory

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular
Structure Type:	Semi-Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

1. Matching Air Demand:

2. Reduced Unloaded Running Time:

3. Soft Starting:

4. Energy Savings at Partial Load:

5. Elimination of On/Off Cycling:

6. Enhanced System Control:

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China Best Sales CHINAMFG 125HP 380V 415V 220V 50Hz 60Hz 16.3m3/Min Direct Drive Screw Air Compressor with Hot selling
editor by CX 2023-10-21